Valspar® Prep Step® All-Stain Primer

Valspar

This all-stain primer is a universal blocker for stains. It hides stains caused from both water and oil. This oil-fortified latex formula also provides a great base for any cabinets, trim, doors, furniture or paneling that are destined for paint. It leaves a smooth finish to allow for optimal topcoat performance and finish.

Universal blocker for plaster, wood and drywall
Improves adhesion to finished wood
Hides both water and oil stains
Cleans up with soap and water

Coverage: 400 ft²/gal

HOW TO USE

Usage

Properly prepared interior walls, trim and ceilings of previously painted or bare drywall, plaster, masonry and wood. For use on finished wood like cabinets, furniture, doors and trim.
Prep

Surface should be clean, dry and dull. Glossy surfaces should be dulled. Thoroughly clean the surface and remove all dirt, dust, chalk, rust, grease, wax, mildew and peeling paint and allow to dry. See technical data page for additional surface prep.
Application

Stir primer thoroughly before and during use. Apply with a premium-quality polyester brush, pad applicator, roller or airless sprayer. If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, working well into the surface.
Dry Time

Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 1 hour - 4 hour
Recoat: 4 hour
Clean-up & Disposal

Immediately clean up with warm, soapy water. Do not pour unused contents down the drain. Consult with local authorities for proper method of disposal and recycling.